background image

. COUNTERS.
. VOLUME.
. STRENGTH.
. DATE/TIME.
. CLEANING.DAYS.
. ECO.SETTING.
. TELEPHONE.#.

Fig. 39

Setting.telephone.numbers

You can set the telephone numbers 

of operator and service in the 

«TELEPHONE #» menu. 
You can also select whether the 

numbers should be shown on the 

display. The operator and service 

numbers are shown, if e.g.

cleaning is required

the product pack is empty

an error has occured

In the «TELEPHONE #» main menu, 

four sub-menus can be selected using 

the arrow buttons 

 :

«SHOW OPERATOR NUMBER»

SHOW OPERATOR NUMBER»»

«SHOW SERVICE NUMBER»

SHOW SERVICE NUMBER»»

«OPERATOR NUMBER»

OPERATOR NUMBER»»

«SERVICE NUMBER»

SERVICE NUMBER»»

Press the enter button   to access 

the «TELEPHONE #» menu.  

(Fig. 39)

The status OPERATOR NUMBER is 

shown on the display:

OPERATOR.NR.:.030123457

Activate/deactivate.operator.number

Use the arrow buttons 

 to 

navitate to the sub menu «SHOW

SHOW 

OPERATOR NR».

».

Press the enter button   to access 

the sub menu.

The display shows the setting «Y» 

(Yes) or «N» (No), it flashes and is 

active, e.g.:

SHOW.OPERATOR.NR.:.

N

Use the arrow buttons 

 to select 

«Y» to show the number display or 

«N» to hide the number display.

Confirm with the enter button 

.

The new setting is displayed 

continuously on the display, e.g.:

SHOW.OPERATOR.NR.:.Y

Press the enter button   again, if 

you would like to restart the setting.

1.

2.

3.

4.

36 

2011 - 01

l.

6 PROGRAMMING THE DISPENSER

Содержание Cafitesse 300 Next Generation

















































Отзывы: