Douwe Egberts CAFITESSE 120, Руководство по эксплуатации

Страница: 24 / 40

24 12.03
Introduction/Safety Instructions
INTRODUCTION
The dispenser is to be used only to deliver
coffee or espresso. If the dispenser should be
used for any other purpose, the manufacturer
will not pay any damages.
Several functions can be programmed by the
service technicians to suit the customer's
requirements. The dispenser can be delivered
in different versions (see chapter "Dispenser
Components").
It is necessary to read the chapter
"Safety Instructions" before putting
the dispenser into operation.
These operating instructions are
valid for several dispenser types.
This is why you may find instruc-
tions for components which are
not installed in your dispenser.
SAFETY INSTRUCTIONS
• Before putting the dispenser into
operation, the operating instructions
must be read and fully understood.
The liquids delivered by the
dispenser are very hot. In order to
prevent scalds, take your hands
and other parts of the body out of
the delivery area before pressing
any delivery button. Stay clear of
that area.
The dispenser should not be
installed outside.
The dispenser must be placed
where it can be looked after by
trained personnel.
The dispenser should not be
installed on a surface near to
where jets of water are used (e.g.
for cleaning).
After the dispenser has been
installed, the power supply plug
must be accessible.
Keep children away from the
dispenser!
• Regular cleaning of the dispenser is
necessary for functional and hygienic
reasons. When cleaning, take care of
sharp edges. There is danger of
injuries. Ensure to pull out the power
supply plug before wiping off the
dispenser. Switch the power switch to
"OFF" before pulling out the power
supply plug. Clean the dispenser’s in-
and outside with a wet cloth; do not
spray it off. Use a cleaning agent
approved by the food industry and
recommended by your Cafitesse
supplier only.
Observe safety instructions and
instructions for use on the pack of
the cleaning agent. Make sure that
the cleaning agent is not poured
into the cooling compartment of
this dispenser.
If the glass cover is treated improperly,
injuries due to broken glass might
occur. The glass cover may only be
removed by a service technician.