Lit. No. 96582, Rev. 00
6
April 1, 2016
85200, 96500 CabCommand HAND-HELD CONTROL
Smooth Stop
Smooth Stop, or "soft" stop, allows the blade to coast
to a stop when a control button is released. The result
is smoother operation, reduced shock to the hydraulic
system and increased hose and valve life.
While there are advantages to having this feature,
there are also advantages to temporarily disabling it.
For example, disabling Smooth Stop allows for more
precise movements of the blade when operating close
to buildings and other obstacles.
All controls come standard with Smooth Stop
ENABLED. To enable/disable this feature, perform the
following steps.
Enable/Disable Procedure
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. (It is not necessary to
start the vehicle.)
2. Verify that the control is OFF. If the power
indicator light is red, the control is ON. Press the
ON/OFF button to turn the control OFF.
3. Hold down the R button while turning the control
ON. The power indicator light will turn ON and the
FLOAT light will flash, indicating the status of the
feature.
Light Flash Indicators
Light
Description
POWER – red Solid ON = control is ON
FLOAT – green
1 flash = Smooth Stop enabled
2 flashes = Smooth Stop disabled
Performing the sequence multiple times will toggle the
Smooth Stop feature between enabled and disabled.
One-Touch FLOAT
One‑Touch FLOAT immediately activates the FLOAT
mode and releases the blade to the ground without
having to hold down the LOWER button. This can
improve transition time when backing up to plow
forward again, eliminating the time spent holding the
control and waiting for the blade to fully drop.
All controls come standard with One‑Touch FLOAT
DISABLED. To enable/disable this feature, perform
the following steps.
Enable/Disable Procedure
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. (It is not necessary to
start the vehicle.)
2. Verify that the control is OFF. If the power
indicator light is red, the control is ON. Press the
ON/OFF button to turn the control OFF.
3. Hold down the LOWER button while turning the
control ON. The power indicator light will turn ON
and the FLOAT light will flash, indicating the status
of the feature.
Light Flash Indicators
Light
Description
POWER – red Solid ON = control is ON
FLOAT – green
1 flash = One-Touch FLOAT disabled
2 flashes = One-Touch FLOAT enabled
Performing the sequence multiple times will toggle
the One‑Touch FLOAT feature between enabled and
disabled.
Western Products reserves the right under its product improvement policy to change construction or design details and furnish equipment when
so altered without reference to illustrations or specifications used. Western Products or the vehicle manufacturer may require or recommend
optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Western Products offers a limited warranty for all
snowplows and accessories. See separately printed page for this important information. The following are registered (
®
) or unregistered (™)
trademarks of Douglas Dynamics, LLC: SECURITY GUARD™, WESTERN
®
, WIDE‑OUT™.
Printed in U.S.A.
