Lit. No. 96582, Rev. 00
5
April 1, 2016
85200, 96500 CabCommand HAND-HELD CONTROL
Clearing an Established 4-Digit Security Code
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
2. If the snowplow is locked (the control power indicator
light will be flashing rapidly), unlock it by following the
Manual Unlock procedure.
3. Press the ON/OFF button to turn the control OFF.
Verify that the power indicator light is OFF.
4. With the control OFF, press the #2 button four
consecutive times, and then press the #3 button
four consecutive times. This sequence (2, 2, 2, 2,
3, 3, 3, 3) will clear the 4‑digit security code from
the SECURITY GUARD™ system. The FLOAT
light will flash to indicate that the 4-digit security
code was cleared.
NOTE: To enter a new 4-digit security code, see
"Activation & Establishing a 4-Digit Security Code."
Light Flash Indicators
POWER – Red
Function
OFF
Control is OFF
Solid ON
Control is ON and active
Slow flash
No communication
Fast flash
Plow is locked – enter 4‑digit
security code to unlock
FLOAT – Green
Function
Solid ON
FLOAT function is active
Fast flash
Security code activation in
progress
Additional Notes
• The SECURITY GUARD system requires any
control other than the one with the assigned
4‑digit security code to enter the security
code before the snowplow can be activated.
Once the security code is established, the
SECURITY GUARD system recognizes that a
control with the same security code is attached,
and does not require a manual unlock to activate
the snowplow. The system will recognize the
control as "safe" and will automatically unlock.
• In the event that a snowplow is locked and cannot
be manually unlocked or reset, contact your
Authorized Distributor.
• REMINDER: Record your security code in the
provided boxes for future reference.
