Page 3 of 12
SPECIFICATIONS
DMX connectors:
Gold plated 5 pin Neutrik D-1 Series XLR connectors or optional terminal blocks
Input Circuit:
EIA-485 receiver (LT1785) with 120 ohm termination resistor b Data &
-
Data
Output Circuit:
ESD protected EIA-485 transceiver (LT1785)
Isolation:
None. DMX input(s) not isolated from DMX output(s).
Expansion circuit:
Gold plated 3 pin female Neutrik D-1 Series XLR connector or optional terminal
block
I C (Inter-Integrated Circuit) Bus
2
Indicators:
Ten green SHOW LEDs
One green PAUSE LED
One green LOOP LED
One yellow START
LED
One yellow END
LED
Up to four red INPUT/RECORD LEDs (One per universe)
User controls:
Ten [SHOW] buttons
One [PAUSE] button
One [LOOP] button
One [REWIND] button
One [FORWARD] button
One [RECORD] button
Power input:
Attached universal power supply 100 - 240VAC, 50/60 hertz, 5 watts
Color:
Top, bottom and sides: Silver hammer tone
Front and back: Black
Size :
1.7"H x 6.5"D x 16"W
