19
1.
Turn off Dosell by pressing and holding the multifunction button for
at least 8 seconds. A sound signal confirms that the device has shut
down.
2.
Lift Dosell straight up and then out
to detach it from the bracket.
3.
Install 6 new AA batteries in the battery compartment on the back.
Check that the batteries are inserted in accordance with the plus
and minus markings inside the battery compartment.
Recycle the old batteries according to local regulations.
4.
Hang Dosell back on the bracket and start
it up again by pressing the multifunction
button. Dosell will automatically return to
the state it was in before the batteries
were changed. If the device was loaded
with sachets when the batteries were
replaced, the next sachet will be
dispensed as usual.
6.8 Change of user (reset to factory settings)
If a Dosell device is no longer being used it can be reset to factory
settings, after which it can be configured for a new user.
To delete all user information and reset Dosell to its factory settings,
connect to Dosell using the app and select Configuration from the main
menu.
Then select the trash can in the top right corner. Make sure you empty Dosell of any
remaining sachets. If there are still medication sachets in the device during a factory
reset, these will be ejected backwards to facilitate emptying. Any leftover medication must
always be taken to a pharmacy for disposal.
Once reset, the Dosell device can be connected up to a new user.
