dosatron D90GL05BPVF Скачать руководство пользователя страница 37

Страница: 37 / 44

DOSATRON INTERNATIONAL S.A.S /

Warranty

DOSATRON INTERNATIONAL

S.A.S. agrees to replace any part

recognised as defective when new

for a period of twelve months from

the date of purchase by the initial

purchaser.

To obtain a replacement under

warranty, the appliance or spare part

must be returned to the manufacturer

or authorised distributor along with

the original proof of purchase.

The said appliance or part may be

recognised as defective following

an inspection carried out by the

manufacturer or distributor.

The appliance must be rinsed to

remove any trace of chemicals and

sent postage paid to the manufacturer

or to the distributor. It will then be

returned free of charge after repair if

it is covered by the warranty.

Interventions cannot be carried out

under warranty for the purpose of

extending the term of this warranty.

This warranty only applies to

manufacturing defects.

This warranty does not cover any

defects resulting from abnormal

installation, the use of inappropriate

tools, incorrect installation, improper

maintenance, environmental acci-

dents, or corrosion caused by foreign

objects or liquids found in or near the

appliance.

For the dosing of aggressive

products, please consult your vendor

before any use in order to confirm

their compatibility with the dosing

pump.

This warranty does not cover seals

(wearing parts) or any damage

caused by water-borne impurities,

such as sand and biofilm.

To validate this warranty, a filter (e.g.

120 mesh - 130 microns, depending

on your water quality) must be

installed upstream of the appliance.

DOSATRON INTERNATIONAL

S.A.S. declines any liability if the

device is used in conditions that do

not comply with the requirements

and tolerances specified in the user

manual.

There is no express or implied

warranty with respect to other

products or accessories used

in conjunction with DOSATRON

INTERNATIONAL S.A.S. appliances.

Содержание D90GL05BPVF













































Результаты поиска

Содержание D90GL05BPVF

Отзывы:

Похожие инструкции для D90GL05BPVF

Бренды по названию

Популярные бренды

dosatron D90GL05BPVF, Руководство пользователя

Результаты поиска

Содержание D90GL05BPVF

Отзывы:

Похожие инструкции для D90GL05BPVF

Бренды по названию

Популярные бренды