851-620 Rev. A
9
Dorner Mfg. Corp.
7400 Ultimate Series End Drive Conveyors
Installation
Figure 14
2.
Attach the key stops
(Figure 15, item 1)
to the tip up
shaft
(Figure 15, item 2)
. The rounded end of the key
stop should face the tail.
Figure 15
3.
Attach the nose bar idler shaft hands
(Figure 16, item 1)
to the tip up shaft
(Figure 16, item
2)
.
Figure 16
4.
Attach the nose bar transfer post
(Figure 17, item 1)
to
the nose bar idler shaft hands
(Figure 17, item 2)
.
Figure 17
5.
Ensure that the nose bar pucks
(Figure 18, item 1)
are
in line with the conveyor frame
(Figure 18, item 2)
.
Figure 18
1
1
2
1
2
NOTE
Do not insert the pull pins on the tension end
of the conveyor until the belt has been
installed.
2
1
2
1
180˚
