dormakaba USA Inc. Remote Disable HW/SW Setup 7044.0822 Rev A 08/22 |
7
5.
Optional: Connect AC Adapter to 9V DC connector.
6.
Reconnect the safe lock to the system.
7.
The default setting within the lock for silent alarms is set to OFF.
Consult the System User Guide (Document #7040.0320) for further instructions on
how to change silent alarm and remote disable settings.
Alarm Box Connection Diagram
Lock Connector: Connect to BAT port on lock with 41040-2 cable.
9V DC Connector: Optional connection to 701107 AC Power Supply Kit.
Terminal Block: Connection to alarm/control panel.
1.
EXT- (Control Signal Reference Voltage or Ground)
2.
EX+ (+5V DC Min. to +12V DC Max. Control Signal)
3.
NO (Normally Open)
4.
COM (Common)
5.
NC (Normally Closed)
9V
DC