34
ED50LE
09-2021
DL4616-002
dormakaba ED50LE operator – Fine cover
Installation Instructions
Chapter 10
10.8 Install track assembly
Fig. 10.8.2 Slide shoe installation on CPD lever
10.8.1 Locate and drill track mounting
holes.
1. Using applicable template, locate and
drill mounting holes for track.
10.8.2 Install slide shoe assembly onto
CPD lever.
1. Thread pivot pin M8 SHCS into CPD
lever mounting hole.
2. Use 6 mm hex key to tighten.
10.8.3 Slide track assembly onto slide shoe.
1. Insure track components and CPD lever
are assembled based on hand of door
(Para. 10.4).
2. With fixing piece removed from track on
opposite end from bumper, slide track
assembly onto shoe (Fig. 10.8.3).
3. Install second fixing piece onto track.
10.8.4 Secure track assembly to door.
1. Attach track fixing pieces to door using
selected fasteners.
• Insure track is level as fasteners are
tightened.
10.8.5 Install end caps and spindle caps.
1. Install two end caps on track and spindle
cap.
1
Pivot pin M8 SHCS
1
2
2
CPD lever
Fig. 10.8.3 Track assembly installed onto slide shoe
3
Shoe
4
Bumper stop
5
Bumper
6
Fixing piece
3
4 5
6
6
6
6
Fig. 10.8.1 Track mounting holes in door
1
1
1
Track mounting holes
Fig. 10.8.4 Track assembly secured to door
Fig. 10.8.5 End caps and spindle cap installed
2
2
2
1
End cap
2
Spindle cap
