Dorma ED 100, Руководство по эксплуатации, Страница: 7 / 8

ED 100, ED 250
—
7
8. EC Declaration of conformity
DORMA Deutschland GmbH
DORMA Platz 1, 58256 Ennepetal
hereby declares that the products
ED 100, ED 250
comply with the provisions of the named EC Directive(s) and
that the standards and/or technical specifications referred to
in the following have been applied.
Directive: 2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic
compatibility
The technical documentation is available from the Product
Compliance Manager: product.compliance@dorma.com .
Harmonized European standard, national rule:
EN 13849-1 EN ISO 12100-1 EN ISO 14121-1
BGR 232 EN 61000 - 6 - 2 EN 61000 - 6 - 3
EN 61000 - 3 - 2 EN 61000 - 3 - 3 EN 55022
EN 60335 - 1 EN 60950 - 1
9. EC Declaration of incorporation
DORMA Deutschland GmbH
DORMA Platz 1, 58256 Ennepetal
hereby declares that the incomplete machine
ED 100, ED 250
complies with the following basic requirements of the
Machine Directive (2006/42/EC)- Appendix I, Article:
1.1.3, 1.1.5, 1.2.1, 1.2.3, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3,
1.3.4, 1.3.7, 1.3.8.1, 1.3.9, 1.5.1, 1.5.2, 1.5.4- 1.5.10,
1.5.16, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.7.1.1, 1.7.3, 1.7.4
The incomplete machine also complies with all relevant
provisions of the directives 2006/95/EC und 2004/108/EC.
It may be installed and operated in automatic door
systems in accordance with the Machine Directive if the
manufacturer of the system ensures that all requirements
of the Machine Directive are complied with and if the
manufacturer issues a EC Declaration of conformity.
The special technical documents have been prepared and
are available from the Product Compliance Manager:
product.compliance@dorma.com.
Upon a substantiated request, they will be electronically
transmitted to the national authorities.
6. Troubleshooting
Functional errors may have many causes.
The errors are often caused by environmental conditions and
the drive unit will therefore try to detect and to react to them
accordingly. The drive unit stops the current function and
starts again after a waiting period or a new pulse. If it does
not work, the automatic function will be shut off and an error
message will be output.
This is indicated by a red LED on the program switch.
The display flashes or lights permanently and indicates an
error that need to be eliminated by the DORMA Service.
The following options are available to reset error messages:
1. Switch the program switch to the OFF position.
2. Mains reset. Switch off the power switch.
Restart after 10 seconds.
The cause should be analyzed and eliminated before an error
message is acknowledged.
Self-help in case of errors
In case errors occur during the operation
please check the following:
• Mains voltage available?
• Is the power switch on?
• Can the door be freely moved?
• Is the door manually locked, shutdown
(lock switch) activated?
• Has the correct function been selected with the
program switch?
• Is the turning range of the door free from obstacles?
• Has the hold-open system been triggered?
Please contact the Service Department if these points are
okay and the doors system still does not work.
7. Disassembly, recycling and disposal
The disassembly is carried out in the reverse order of the
installation manual and must be carried out by qualified
personnel.
De-energize the door system before disassembling the
door system.
Dispose the product in an environmentally friendly
manner. Electronic parts and batteries may not be
disposed via the general trash.
Take them to an appropriate collection point for
disposal.
Always comply with the applicable national legal provisions.