1.1.2 Combined LEDs with fiber-optic rotary joint
(a)
2-LED model
(b)
3-LED model
(c)
4-LED model
Figure 1.2:
Combined LEDs with fiber-optic rotary joint
The
Combined LEDs with fiber-optic rotary joint
are composed of a standard
Combined LED
body where the
Beam
aperture
has been replaced with a
Fiber-optic rotary joint
. The light sources are integrated into a
Stator (Black)
, with
the light leaving through a
Rotor (Yellow)
(Fig.
). They contain the following elements.
• The
M8 connector ports
are used to provide power to the LEDs. There is a single port per LED. The pinout can be
found in Figure
• The
Beam aperture
outputs light. The standard model uses an FC-type connector.
• The
Fan grids
are found on the sides. They must be kept clear at all times to prevent overheating.
• The
Stand
is used to hold the LED vertically for easy use of the rotary joint.
Figure 1.3:
Rotor (Yellow) and Stator on the LEDFRJ-2
Chapter 1. General Overview
4