Doremi IMS1000, Инструкция по установке и эксплуатации

Страница: 61 / 310

IMS.OM.002949.DRM Page 61 of 310 Version 1.4
Doremi Labs
5.8 Marriage
Marriage on the Barco projector is done directly on the projector. After marriage is complete, the
Barco projector will be automatically detected in the Device Manager.
Once the projector has finished booting up, the taillights at the back of the projector will be red,
indicating that the board and the projector are not married. If there is a touch screen attached to
the projector, two tamper errors will appear, indicating that the marriage has not occurred
(Figure 57).
Figure 57: Tamper Errors

To begin the marriage process, push the Key button. It should be red to indicate that the
marriage has not been completed (Figure 58).
Figure 58: Red Key Button

After you push the Key button, the numbered buttons should flash orange.

Enter in the correct password. Contact your administrator for the correct password.
Key
Button