Doremi IMS1000, Инструкция по установке и эксплуатации

Страница: 271 / 310

IMS.OM.002949.DRM Page 271 of 310 Version 1.4
Doremi Labs
16.3 Temporarily Setting the Network Configuration via USB
This method should be used to “rescue” the device in case the IP address is lost or forgotten.
The network configuration is set temporarily until the next reboot. The current IP will be back
after the next reboot.
To update the network configuration with a USB flash drive:
1. Create a directory called "doremi" at the root of the USB key.
2. Create a directory called "tmp" inside the /doremi/ directory.
3. Create a directory called "network" inside the /doremi/tmp/ directory.
4.
Create a file inside the “network” directory and name it “ifconfig.0”. This will be used to
configure Ethernet port 0.
For static IP, enter the following information in the “ifconfig.0” file, replacing the items in bold
with your desired settings:

interface: eth0

ip: 42.0.0.1

mask: 255.255.255.248

gateway: 42.0.0.6
For DHCP, use the following format:

interface: eth0

ip: dhcp
5.
Create a second file inside the “network” directory and name it “ifconfig.1”. This will be
used to configure Ethernet port 1.
F
or static IP, enter the following information in the “ifconfig.1” file, replacing the items in bold
with your desired settings:

interface: eth1

ip: 42.0.0.1

mask: 255.255.255.248

gateway: 42.0.0.6
For DHCP use the following format:

interface: eth1

ip: dhcp
6.
Create a file and name it “ntp” (optional) with the following format. Replace items in bold
with your desired settings.
NTPSERVERS="
server1.ntp.org server2.ntp.org "
7.
Create a file and name it “dns” (required for NTP) with the following format. Replace
items in bold with your desired settings.

Nameserver 172.17.16.1

nameserver 8.8.8.8

search rnd.doremilabs.fr

domain rnd.doremilabs.fr