Doosan GC15S-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 55 / 151

Operation Section
53
After Starting the Engine
Observe all indicator lights and gauges frequently
during operation, to make sure all systems are
working properly. All of the indicator lights will come
ON with the ignition switch in the ON position
before the engine is started.
Diesel (12V)
LPG/GAS (12V)
‘
1. The engine oil pressure indicator light (1), will
not come ON with the engine running, unless
there is low or no oil pressure. Stop the engine
immediately, if the light comes ON.
2. The alternator indicator light (2), should not
come ON during normal operation. The
alternator is not producing the sufficient voltage
to charge the battery if the light comes ON with
the engine running.
3. The Spark-ignition G420F(E) engine MIL
(Malfunction Indicator Light) (3) will not come
ON with the engine running, unless the fault or
faults are stored in the memory of the engine
control module (ECM). Stop the engine and
check the electric engine control system if the
light comes ON. Refer G420E Engine of this
section.
4. The diesel engine water in fuel filter indicator
light(4), will not come ON with the engine
running, unless water in fuel filter exceeds
100cc. Stop the engine immediately and drain
the water if the light comes ON.
5. Observe the fuel level gauge (5) for fuel level in
the tank.
6. The engine coolant temperature gauge pointer
(6), will be in the green band with the engine
running, unless the coolant temperature is
excessive.
7. The transmission oil temperature gauge pointer
(7), will be in the green band with the engine
running, unless the oil temperature is excessive.
8. Observe the hour meter(8) make sure it is
operating properly.
8
4
1 2
5 6
7