Doosan GC15S-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 118 / 151

Maintenance section
116
6. Shift the transmission into NEUTRAL. Engage
the parking brake.
7. Remove the dip stick. Observe the oil level.
8. Maintain the oil level between the MIN and MAX
marks on the dip stick.
9. Check for oil leaks at the strainer and drain plug.
10. Stop the engine. Install the floor plate.
Drive Axle Oil - Change
Park the lift truck on a level surface. Apply the
parking brake. Place the directional control lever in
NEUTRAL.
1. Raise the carriage high enough to access the
drain plug and level/fill plug.
2. Block the bottom of the mast with a block of
wood to hold the carriage in the raised position.
3. Turn the ignition switch OFF.
4. Place an appropriate container under the axle to
catch the oil as it drains. Remove the drain plug
and the level/fill plug.
5. Allow the oil to drain completely out. Discard the
old oil according to federal, state, and local
regulations.
6. Clean and reinstall the drain plug.
7. Add sufficient fresh oil through the level/fill
opening until it reaches the bottom of the hole.
See the section
Lubricant Viscosities and
Refill Capacities for the type and amount of oil
to use.