Synchronization
option
Operator’s
Manual
Doosan reserves the right to change any of the above
Page 27 of 32
7. Alarm handling and log list
Alarm handling
When an alarm occurs, the unit will automatically go to the alarm list if so selected (setting 6900
Alarm jump) for display of the alarm. If setting 6900 is OFF, you have to press to enter the
alarm list.
If reading of the alarms is not desired, use the ESC push-button to exit the alarm list.
If you decide to enter the alarm list later, use the push-button to jump directly to the alarm
list reading.
The alarm list contains both acknowledged and unacknowledged alarms provided that they are
still active (i.e. the alarm condition is still present). Once an alarm is acknowledged and the
condition has disappeared, the alarm will no longer be displayed in the alarm list.
This means that if there are no alarms, the alarm list will be empty.
This display example indicates an unacknowledged alarm. The display can show only one
alarm at a time. Therefore, all other alarms are hidden.
To see the other alarms, use the
and
push-buttons to scroll in the display.
To acknowledge an alarm, place the cursor (grey area) over the channel number and then
press
.
MAINS FAILURE
Alarmlist :
Ch 1300 UNACK
.
BB U< 1
09-09-23 15:20:21:0
1/1 l
( )
