Errors are indicated with sound signalization on door controller EC4, mode selector COM20 and light
signalization on mode selector COM21 . Mode selector COM20 shows errors on the display .
•
INTERVAL FLASHING AND BEEPING
– indicates a malfunction in the system . By pressing
the
WAKE
BUTTON the flashing and beeping turn into error code indication . When the code
of error is over, the interval flashing continues until the error is active or the WAKE BUTTON
is
repressed
.
LONG PULSE
PAUSE
LONG PULSE
PAUSE
LONG PULSE
PAUSE (3s)
LONG
PULSE
PAUSE
LONG PULSE
PAUSE
LONG PULSE
PAUSE (3s)
…………
24
I
USER MANUAL
LIGHT AND SOUND
DIAGNOSTICS
•
SHORT PULSE
– follows after a long pulse and indicates number 1 .
Short pulse
0,1 s
DURING ERRORS
Interval flashing and beeping
0,5 s
Example in figure: SHORT PULSE
PAUSE
SHORT PULSE
PAUSE
SHORT PULSE
PAUSE
SHORT PULSE
PAUSE
SHORT PULSE = 5
On occurrence of the warning, the light signals appear in the following order:
WARNING CODE
INTERVAL FLASHING
WAKE BUTTON
START FLASH (0 .5s)
PAUSE
(2s)
WARNING CODE
INTERVAL FLASHING
…
In the example above with three long and five short pulses the code of warning is 35 . All warning codes are
shown in section WARNINGS on page 26 .
0,5 s
3 s
The error code reading is the same as with the warnings . A long pulse and a beep indicate number 10,
a short flash and a beep indicate 1 .
Содержание 300 A
Страница 1: ...USER MANUAL AUTOMATIC SLIDING DOOR PRODUCT LINE 300 1 25 2016 product line...
Страница 2: ......
Страница 32: ......