Doorson 300 A, Руководство пользователя

Страница: 6 / 32

PRODUCT PURPOSE
Automatic sliding doors product line 300 can be used as interior or exterior doors . The drive is advised to
be installed inside the building, otherwise a canopy is recommended . In the product line 300 the 300F and
300EF doors are fireproof doors . The 300 THALES r, 300 r, 300 T r, 300 P r, 300 SC r, 300 C r, 300 A and
300 EF are suitable for the installation on escape routes and emergency exits .
Automatic sliding doors product line 300 may only be used according to its specified intended use .
Doorson will not accept any liability for damage resulting from unauthorized modification of
product line 300 or inappropriate use . Furthermore, components/accessories that have not been approved
by Doorson are exempted from liability .
It is important for the safety of persons to follow these instructions:
• do not allow children to play with automatic doors;
• always escort children when walking through automatic doors;
• frequently examine the door status (signs of wear, inadequate functioning and damage to
cables or moving parts) . Do not allow door operation if repair or adjustment is necessary;
• disconnect the power supply (230VAC and battery unit) during maintenance works inside
the drive;
• change the door mode to STOP during the cleaning of the door leaves;
• follow all instructions since incorrect installation can lead to severe injury;
• properly ground the door leaf/leaves if Product line 300 is installed on a metal
construction;
• door leaves with glass must be made of safety glass;
• there should be no contact between glass and hard materials during operation if the leaves
are made from glass only .;
During the planning of automatic sliding doors product line 300, the manufacturer (the person installing
the system) and the commissioner/facility operator have to perform an individual risk assessment
together . All the data is included in the SAFETY ANALYSIS document .
6
I
USER MANUAL
DANGER SPOTS: Automatic doors might cause hazards like
crushing, shearing, hitting and drawing-in at the closing edges .
RESIDUAL RISK: Depending on the structural conditions, the
prevailing door version and the available safety equipment,
residual risks such as crushing and hitting (with a limited force)
cannot be excluded .
A – main closing edge
B – secondary closing edge
Danger spots