Parts and Function
The 595A audio door panel is designed for all DT 2-wire systems.
The front panel is made of zinc alloy for better protection against vandalism & cauterization, and
the call button is also made of zinc alloy with blue backlight for auxiliary illumination, the unlock
and talking LED indicator ensures the door panel is working efficiently.
With the rain cover, the door panel is strongly protected against the rain.
◆
Lock Control Jumper:
to select the lock type. Please refer to Electric Lock Connection
◆
DIP switch:
to set ID code for the door panel, total of 4 door panels can be connected.
Please refer to DIP Switch Settings for additional door panels.
◆
SPK adjust:
to adjust the talk volume.
◆
PROG button:
reserved.
◆
CALL button:
press to call the user.
◆
4P terminal:
to update software via specified programmer. (Manufacturer only)
◆
Connection line:
to connect the bus line and the electronic locks.
BUS (Blue&Green):
connect to the bus line, non polarity.
S2+(Red): the S2+ connect with S1- to activate the relay of ERL to extend a camera of DT-CAM,
Unit Mounting
The location of the door panel should be kept away from direct weather and all intensity light.
Accessory contents:
Accessories include a screwdriver T20, one M4X10 screw, two PA4X25 screws, three PA3x25
screws, three PM3x12 screws and five screw stoppers 6X30.
Installation steps:
Installation height for the door panel is typically 145-160cm.
1. Use screws to fix the back panel and rain cover to the wall, then connect the cable correctly.
2. Attach the front panel to the back panel, then use the screw to fix it.
Wiring and Connection
Basic one-to-one connection
Terminal Description
Speaker
Talk Indicator
Unlock Indicator
Call Button
Front Panel
Microphone
1
2
3
4
7
5
6
1
2
3
4
5
6
Rain Cover
7
M4*10
PM3*12
1
2
3
BUS(Blue&Green);
S2+(Red); PL(White); S1+(Yellow); S1-(Black);
1 2 3
ON
1 2 3
1 2 3
ON
1 2 3
BUS(Blue&Green)
S2+(Red)
PL(White)
S1+(Yellow)
S1-(Black)
4P
terminal
DIP
PROG
SPK adjust
Lock Control
Jumper
Connection line
CALL button
please refer to DT-CAM user instructions for details (Not available from Doorentryonline Ltd)
PL(White): external lock power input, connect to the power positive (power +).
S1+(Yellow): lock power(+) output.
S1-(Black): lock power(-) output.
-
+
AC~
Handset
DPS
PS4
L1 L2 PL S1+ S2+ S-
-4-
Doorentryonline
Ltd
