33
4) Water re-supply
1
Water is resupplied when the water level is found to be low by monitoring it every 2 minutes after completing the
water supply.
2
The motor is stopped during the water re-supply.
3
During washing, a max fifteen times of water re-supply can be done If the water level drops after that, no extra
water is supplied.
4
If the water level is lower than the reset level during water re-supply, the IE error is issued and the heater is turned
off.
2-2 Rinse operation
1) Water supply
1
In the rinsing cycle, only cold water is supplied.
2
In the final rinsing cycle, the cold water valve and the reserved washing valve are opened to inject softener.
3
Circulation pump operates after water supply in rinsing cycle.
2) Re-Water Supply
1
After 1 min. in Rinse Sequence, check water level and work Re-Water Supply.
Part
Water Level
Circulation Model (KHz)
Non-circulation Model (KHz)
Clean jet ON
Clean jet OFF
Normal
23.20
22.95
22.95
Cotton Eco.
Rinse/add. water
23.00
22.75
22.75
WFC3V11ZDNH01D2GW(DWC-PS1512X)_칠레향(SM).indd 33
2017-10-26 오후 4:17:40
Содержание DWC-PS1512X
Страница 10: ...8 2 INLET BOX AS WFC3V11ZDNH01D2GW DWC PS1512X _칠레향 SM indd 8 2017 10 26 오후 4 17 31 ...
Страница 12: ...10 3 CABINET F ASSY WFC3V11ZDNH01D2GW DWC PS1512X _칠레향 SM indd 10 2017 10 26 오후 4 17 32 ...
Страница 15: ...13 5 BASE U AS 1 2 3 5 4 WFC3V11ZDNH01D2GW DWC PS1512X _칠레향 SM indd 13 2017 10 26 오후 4 17 34 ...
Страница 69: ...67 6 WIRING DIAGRAM WFC3V11ZDNH01D2GW DWC PS1512X _칠레향 SM indd 67 2017 10 26 오후 4 17 43 ...
