Donauer High Efficiency 3.0, Инструкция по установке и эксплуатации

Страница: 60 / 116

58
742.641 | 11.43
EN
Setting the country
Note
The country can only be set once!
1. Press

to select a country.
2. Press SET briefly. The country is adopted.
3. Press
SET
for a longer time.
Finishing initial commissioning
1. Read the displayed text and use

to page down until
the text shown at the left is displayed.
2. Press
ESC
and  to correct settings or
Press and hold SET for a longer period of time to finish
initial commissioning. The inverter then synchronises
with the mains grid.
8.8 Switching on the DC supply

Set the DC circuit breaker on the inverter to position
I
(Fig. 7).
After testing via the internal MSD (approx. 2 minutes), the feed-in power can be shown on the
display (assuming that sunlight is present).
Fig. 7: Set the DC circuit breaker on the inverter to position
I