11
Donaldson Company, Inc.
Dust Disposal
Use proper safety and protective
equipment when removing
contaminants and filters.
Empty the dust drawer when it is 2/3 full.
Remove dust that has settled to the bottom of
the collector.
1. Turn power OFF.
2. Manually clean or allow the automatic filter shaker
to clean the filters.
3. When the cleaning cycle is complete, open the filter
access door.
4. Reach inside the opening, grasp the dust drawer
edge and pull the dust drawer out of the collector.
5. Dispose of properly.
12. Insert small wing screws through holes in support
bar. Hand tighten all wing screws.
Step 12
Steps 13-15
13. Inspect filter seal.
14. Insert clean dust pan.
15. Install and close doors.
Step 11
11. Place support bar over center of EZ Filter Pack
