Donaldson Torit TBV-2, Инструкция по установке и эксплуатации

Страница: 14 / 32

Donaldson Company, Inc.
14
Compressed Air Installation
Turn compressed-air supply
OFF and bleed lines before
performing service or maintenance work.
The compressed-air supply
must be oil and moisture free.
Contamination in the compressed air used
to clean filters will result in poor cleaning,
cleaning valve failure or poor collector
performance.
Purge compressed-air lines to remove debris
before connecting to the unit’s compressed-
air manifold.
1. Remove the 1-in pipe cap from unit’s air
manifold and connect the compressed-air supply
line. Use thread-sealing tape or pipe sealant on
all compressed-air connections.
2. Install a customer-supplied shut-off valve, bleed-
type regulator with gauge, filter, and automatic
condensate valve in the compressed-air supply
line.
All compressed-air components
must be sized to meet the
maximum system requirements of 0.86 cu
ft/pulse at 90-psi supply pressure.
Do not increase supply pressure above
100-psi.
Component damage can result.
NOTICE
NOTICE