Evolution EV AC
12
7
TEMPERATURE SELECTION
7.1
Selecting the boiler set point temperature
T C 7 0
/
The desired boiler operating temperature is selected using the push-in button, as shown in the
picture. Press the button down gently to release it. To press it back in again, push the button until it
locks. The push-in button is turned to select the desired temperature.
"tc"
will appears on the
display and you can view the selected set point temperature. When you have selected the
temperature, push the button in again. The display will return to standby status after ten seconds.
The boiler set point temperature can also be selected by browsing with the set button until the
"tc"
option appears on the display. When it appears, turn the push-in button to select the desired
temperature.
The boiler set point temperature range that can be selected is 30 - 85 ºC. Model
Evolution
boilers
are condensing boilers, and so in order to obtain maximum boiler performance and energy savings,
it is therefore recommended to select a set point temperature of 55 - 70 ºC, providing the heating
system installed and the insulation conditions of your home permit this.
7.2
Selecting the hot water set point temperature (with storage heater only)
A ( 4 5
/
The desired hot water temperature is selected using the push-in button, as shown in the picture.
Press the button down gently to release it, and to press it in again, push the button until it locks.
To select the desired temperature, turn the push-in button.
"AC"
will appear on the display and
the selected set point temperature can be viewed. When you have selected the temperature,
push the button in again. The display will return to standby status after ten seconds. The hot
water set point temperature range permitted is 15 - 60ºC.
The hot water set point temperature can also be selected by browsing with the set button until
the option
"AC"
appears. When this option appears on the display, turn the push-in button to
select the desired temperature
.
