Dometic RML 8551, Руководство по установке

Страница: 5 / 48

5
With this installation method, regular maintenance of the gas burner is only possi-
ble once the device has been dismantled. It is imperative that the refrigerator be
installed in a way to allow easy removal.
We therefore recommend providing an adequate access opening (service flap) for
ready serviceability from the outside.
1.1.2 Side installation with floor-roof ventilation
Fig. E1
Fig. E2
Fig. E3
Air vent grille not
blocked! OK !
(Fig. E1) The air vent grilles are blocked. There
must be a distance between the door and the air
vents of at least 25 mm!
If the door/grille distance is between 1
"
and
1.77
"
, we recommend installing a Dometic
ventilation kit ( item no. 241 2985 - 00/0 ) to
achieve an optimal cooling performance in high
ambient temperatures.
(Fig. E2) The air vent grilles offer an unobstruc-
ted dissipation of heat and exhaust gas even
when the door is opened.
Proper ventilation of the refrigerator can also be
achieved by lower air intake aperture in the floor
and upper roof exhaust vent (see Fig. E3). A flue
has to be provided between the top edge of the
refrigerator and the roof ventilation which
directs the hot air and the exhausts straight to
the air vent in the roof.
The floor opening must have a cross section of
at least
30.78 sq inches . Protect the opening,
e.g. with a baffle plate and a net, to prevent dirt
from entering the gas burner. Compared to side
ventilation, this ventilation method can allow
more dirt to enter the rear area of the refrigera-
tor, which makes regular maintenance of the gas
burner, at least once a year, necessary.
floor opening:
at least 50 mm wide,
at least 520 mm long
hot air
condenser
Recommendation:
Roof vent
R500
THE SIGN OF COMFORT