Dometic ORIGO A100, Руководство по эксплуатации

Страница: 15 / 128

Dometic ORIGO Mounting the stove
15
7 Mounting the stove
You can fit the stove into the countertop of your kitchen.
7.1 Selecting the installation location
When selecting the installation location, observe the following instructions:
 Select a well-ventilated location for the device.
 Ensure a minimum distance (fig. 6 , page 4) of
– 50 mm to side and back walls
– 750 mm between stove coil element and horizontal surface above the
stove
 Avoid draft at the installation location.
If you fit the stove in an open cockpit or other open areas mount an
additional wind protection.
 Avoid cabinet storage space above the stove.
Otherwise you risk burns and fire when reaching over the stove.

Do not operate the device in spaces where danger of explosion is
present.
7.2 Installing the stove
a
Caution – Danger of damaging the device!
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Cut a rectangular hole into the countertop (dimensions see following
table):
➤
Open the top and remove the canisters (see chapter “Taking out the
canister” on page 17).
➤
Open up the hinge part in the back of the stove.
Model Dimensions W x D x H
A100 255 x 150 x 340 mm
A200 485 x 150 x 340 mm
C100 255 x 150 x 340 mm
C200 485 x 150 x 340 mm
_Origo_A100_A200_C100_C200.book Seite 15 Dienstag, 26. Juli 2011 7:30 19