35
To connect the pressure-regulator to the gas bottle, the valve of gas bottle must be
closed.After connecting the pressure-regulator to the bottle by screwing,connect the two
ends of the tubing to the nipples and secure them with the two hose clipse.
When fitting the connection to the gas inlet of the appliance , hold counterpart to avoid
straining and possibly damaging.
The gas bottle must only be used in an upright position and particular care must be taken
every time the appliance is connected to the gas bottle to ensure that there are no leaks,
that the gas pipe (rubber hose) is not under tension or kinked, and that it is not in contact
with hot surfaces.
The connection pipe and gas bottle should always be located in positions where they will
not be tripped over or otherwise inadvertently disturbed.
Before attempting to light the burner, every time after connection, turn on the gas at the
bottle and check the gas connections for leaks by applying a soap and water solution over
them and watching for bubbles, which would indicate a leak.
After testing dry off traces of detergent.
For your safety:
Do not check for leaks with a naked flame!
Do not smoke while checking for leaks!
10. Gas equipment system
The gas equipment consists of
the multiple regulator-unit
C
regulator with built-in thermoelectric ignition control
the burner
the piezo-gas lighter
D
(only for model EGP)
Knob
C
can be turned to 3 function positions:
:
large flame = high cooling performance (MAX)
:
small flame = low cooling performance (MIN)
:
off-position = gas supply to burner is shut off.
If, for any reason the gas flame extinguishes, the ignition
control is working automatically and shuts off gas supply.
GB
Seal
All manuals and user guides at all-guides.com
