Guarantee
CoolAir SP950C, SPX1200C
Fit the fastening frame and the condenser at the MAN TGA/TGX XLX, XXL as follows:
I
➤
Insert and tighten the four M8 x 30 bolts, eight U washers M8 8.4 x 16 mm and
four M8 retaining nuts (fig.
1
, page 3) in the mounting frame for the condenser
unit.
➤
Remove the existing nuts (fig.
2
1
, page 4) from the fastening of the air filter
housing.
➤
Fasten the fastening frame to the fastening bolts using the M8 8.4 x 20 mm U
washers and M8 retaining bolts provided (fig.
2
1
,
page 4).
➤
Attach the mounting frame to the bottom of the bracket with the M8 x 16 bolts,
U-washers M8 8.4 x 20 mm and M8 retaining nuts provided (fig.
2
2
,
page 4).
➤
Place the condenser unit on the projecting bolts of the mounting frame and bolt
to the four U washers M8 8.4 x 16 mm and four M8 retaining nuts.
➤
Check that all bolts are still tight after travelling approximately 200 km.
6
Guarantee
The statutory warranty period applies. If the product is defective, please contact the
service partner in your country (addresses on the back on the instruction manual).
Our experts will be happy to help you and will discuss the warranty process with you
in more detail.
NOTE
Only install the condenser unit after you have attached the mounting
frame on the rear wall of the truck.
SP950C-SPX1200C-MAN-XXL--I-16s.book Seite 8 Donnerstag, 7. März 2019 2:16 14
