EN
Dometic Harrier Inverter
Installation
19
➤
Tighten the bolts using a torque spanner to a torque of 4.0 Nm.
8.8
Connecting communication cables
➤
Connect to the transfer PCB on the ADB ceiling plate:
–
the white 13-pin connector from the ADB cover (
1
)
–
the black 4-pin connector from the rooftop unit (
2
)
8.9
Installing the ADB cover
➤
Place the ADB cover over the ceiling plate by clipping the front edge under the
clips near the outlet vent, then doing the same on the other side.
Be aware of the orientation of the cover as the display should align with the
recessed area of the ceiling plate.
CN3
CN2
CN4
CN1
CN5
1
2
g
h
54-AA-MA53501.book Seite 19 Dienstag, 19. Februar 2019 2:20 14
