EN
Operating the roof air conditioner
Harrier series
18
✔
The switch-on time is set on the roof air conditioner.
The roof air conditioner is switched on with the selected air conditioning mode
at the specified time.
✔
The
OFF
symbol flashes on the display of the remote control.
If no OFF time is needed press the
button again without changing the hour value.
➤
Use the
+
or
–
button to set the number of hours until the air conditioner will be
switched to stand-by.
➤
Press the
button again to confirm the value.
✔
The switch-off time is set on the roof air conditioner.
Switch the roof air-conditioner to Stand-by.
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤
Press the
button once.
✔
The timer symbol disappears.
✔
The setting has been cancelled.
7.10
Activating the sleep function
I
When the sleep function is activated, the compressor speed and the fan speed is
limited to a lower level to reduce the noise levels for easier sleeping.
➤
Set the required temperature (see chapter “Setting the temperature” on
page 16).
➤
Press the
button.
✔
The
symbol appears in the display.
The sleep function is activated.
➤
To deactivate the sleep function press the
button again.
I
NOTE
The sleep function is only available in “Cooling” (
) or ”Heating" (
)
modes.
NOTE
The sleep function is deactivated if the
MODE
button is pressed.
