EN
Harrier series
Before initial use
13
6
Before initial use
Inspection before starting up
Before you switch on the roof air conditioner, observe the following:
➤
Check whether the supply voltage and frequency correspond to the values
specified in the technical data (see leaflet).
➤
Ensure both the air intake opening and the air nozzles are free. All ventilation
grilles must always be kept free to ensure that the roof air conditioner is able to
operate at maximum capacity.
!
Set the remote control
➤
Insert the batteries (see chapter “Replacing the remote control batteries” on
page 19).
✔
The display shows all symbols for 5 seconds.
✔
The remote control is ready for operation.
7
Operating the roof air conditioner
7.1
Basic notes on operation
The roof air conditioner has three operating modes:
You can use the
control panel
to
•
switch the roof air conditioner to and from stand-by mode
•
switch the ambient lights on and off
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the intake
grille.
Operating mode
Features
Off
The roof air conditioner is switched off.
The remote control is inactive.
Stand-by
The roof air conditioning is ready for operation and can be switched
on with the remote control. The ambient lights are available.
On
The roof air conditioner is conditioning the air in the interior.
