Dometic 9600023490, Инструкция по установке и эксплуатации

Страница: 27 / 228

27
EN
Skysol Powered Roofblind Troubleshooting
➤
Fully deploy the blind to clean the fabric.
➤
Fully stow the blind to clean around side tracks or frame.
Spot cleaning
➤
Spot-clean with a soft white cloth, moistened with warm water, add a mild
detergent if needed (non-abrasive and with no additives).
➤
Blot gently to avoid creasing or damaging the fabric. Always leave the blind
deployed to dry thoroughly.
Removing bugs
➤
To prevent damage to delicate fabrics, do not use any type of stick, wand or
handle to push out anything caught in your blinds. We recommend gently
blowing out using either a can of compressed air or a hair dryer on a cool
setting.
➤
The blind panels can be removed for cleaning.
Cleaning windows
➤
Always ensure your blinds are fully stowed before cleaning windows. This will
prevent spoiling the blind fabric by splatter or sprays of water or detergent.
Panels can be unclipped and removed for fabric cleaning (fig.
h
, page 11 to
fig.
i
, page 11).
10 Troubleshooting
Fault Solution
Moving rail not straight.
➤
Disconnect the first fabric panel at the opposite end
to the crooked moving rail (fig.
h
, page 11 to
fig.
i
, page 11).
➤
Adjust the coupling (fig.
b
, page 8).
Panel not fully deploying.
➤
Disconnect the panel behind the non-working panel
to expose the cords (
fig.
h
, page 11
to
fig.
i
,
page 11).
➤
Check for any cord that maybe caught or crossed
and re-connect (fig.
d
, page 9).
Motor not working.
➤
Check if wiring for voltage to the motor is correct.
➤
If power supply is checked and the motor is still
faulty contact your distributor.
➤
If using the AP Remote control refer to the AP
Remote control manual.
Motor running slow or fast.
➤
Check for correct supply voltage.
Remote control (optional)
not operating.
➤
Refer to the remote control manual.