EN
Safety instructions
CF 35, CF40, CF50
10
A
NOTICE! Damage hazard
•
Check that the voltage specification on the type plate corresponds to
that of the energy supply.
•
Only connect the cooling device as follows:
–
With the DC connection cable to a DC power supply in the vehicle
–
Or with the AC connection cable to an AC power supply
•
Never pull the plug out of the socket by the cable.
•
If the cooling device is connected to a DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
•
If the cooling device is connected to a DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
•
The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
•
Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose.
•
Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
•
Risk of overheating!
Ensure at all times that there is a minimum of 50 mm ventilation on all
four sides of the cooling device. Keep the ventilation area free of any
objects that could restrict the air flow to the cooling components.
Do not place the cooling device in closed compartments or areas with
none or minimal air flow.
•
Ensure that the ventilation openings are not covered.
•
Do not fill the inner container with ice or fluids.
•
Never immerse the cooling device in water.
•
Protect the cooling device and cables against heat and moisture.
•
The device shall not to be exposed to rain.
DometicCF35-CF50_OPM4445101783_EMEA16_202x-xx-xx.book Seite 10 Freitag, 18. Dezember 2020 5:37 17