DOMENA Linea 1.0, Инструкция по эксплуатации

Страница: 28 / 32

28
PROBLEMS Causes SOLUTIONS
None of the lights are lit.
The machine does not heat
up.
- Power supply problem
- Appliance not plugged in or On/
Off button not pressed
- Automatic safety system is triggered
if steam station has not been used
for 10 minutes
- Other
- Check the plugs and mains.
- Plug in the appliance and press the
On/Off button.
- Press the On/Off switch to restart the
appliance.
- Go to your local dealer.
The iron does not heat up. - Linéa 2.0 : Thermostat dial at the
off position
- Other
- Put the dial to the desired
temperature.
- Go to your local dealer.
No steam is produced. - When you call for steam right at
the start,
- Appliance not ready
- The reservoir is empty
- The reservoir is incorrectly inserted
or has not been inserted
- The anti-scale cartridge has not
been inserted
- The pilot light ANTI-CALC flashes
or is on
- Other
- Press the steam button until steam
does arrive.
- Wait until the on/off pilot light is on
- Fill the reservoir.
- Insert the reservoir and push it fully in.
- Insert an anti-scale cartridge into the
reservoir.
- Change the anti-scale cartridge. Press
the steam button.
- Go to your local dealer.
Water is produced with the
steam.
- Linéa 2.0: The iron soleplate is not
hot enough
- Over steaming
- Water condensation in the hose
- Other
- Put the dial to the settings
ll
–
lll
.
- Wait for the iron pilot light to go out.
- Press the steam button several times
- Go to your local dealer.
The machine makes a
noise.
- There is no water in the reservoir
- The reservoir is incorrectly inserted
or has not been inserted.
- Other
- Fill the reservoir.
- Insert the reservoir and push it fully
in.
- Go to your local dealer.
ANTI-CALC pilot light
flashes or is lit
- Anti-scale cartridge needs to be
replaced
- Replace the cartridge. Switch the
appliance off and back on. Wait until
the on/off pilot light is permanently
on.
The on / off pilot light
flashes
- The appliance is not ready. - Wait until the on/off pilot light is
permanently on to use the appliance.
What to do if…