DOMENA ecofibres CS6, Инструкция по эксплуатации, Страница: 22 / 24

- 22 -
MAINTENANCE
WHAT TO DO IF…
PROBLEMS CAUSES SOLUTIONS
None of the lights are
lit.
- Power supply problem
- Other
- Check the plugs and mains
- Go to your local dealer
The iron does not heat
up.
- Appliance not plugged in or On/Off button not
pressed
- Other
- Plug in the appliance and press the On/Off button.
- Go to your local dealer
No steam is produced.
- The reservoir is empty
- The reservoir is incorrectly inserted or has not been
inserted.
- The anti-scale cartridge has not been inserted
- The anti-scale cartridge is incorrectly inserted in the
reservoir
- The cartridge lifetime pilot light is on
- Other
- Press the steam button or the steam trigger on the pistol handle
- Fill the reservoir
- Insert the reservoir and replace the tank cap
- Insert an anti-scale cartridge into the reservoir
- Insert the anti-scale cartridge correctly and replace the tank
cap
- Change the anti-scale cartridge. Press the steam button
- Go to your local approved service dealer
The machine makes a
noise.
- There is no water in the reservoir
- The reservoir is incorrectly inserted or has not been
inserted.
- Other
- Fill the reservoir
- Insert the reservoir and replace the tank cap
- Go to your local approved service dealer
The supply of steam is
interrupted
- Long periods of steaming - Wait until the indicator light illuminates again before requesting
steam.
• To clean the body of the appliance, simply use a moist cloth. Do not use solvents
or detergents which may harm the body material.