background image

WARNINGS

www.dreamonme.com/help

4

• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN 

SERIOUS INJURY OR DEATH.

• TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED 

ON THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.

• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR 

SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.

• 

DO NOT

 USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT 

DREAM ON ME - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854

 FOR REPLACEMENT 

PARTS.

• 

DO NOT

 USE A WATER MATTRESS WITH THIS CRIB.

• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.

STRANGULATION HAZARD:

• STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S 

NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. 

DO NOT

 SUSPEND STRINGS OVER A 

CRIB OR ATTACH STRINGS TO TOYS.

• TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS OF 

BODY OR CLOTHING ON LOOSE FASTENERS.

• 

DO NOT

 PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY 

STRANGLE A CHILD.

• INFANTS CAN SUFFOCATE ON SOFT BEDDING.
• NEVER ADD A PILLOW, COMFORTER OR PADDING.
• NEVER PLACE ADDITIONAL PADDING UNDER INFANT.
• NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS, 

BECAUSE THEY CAN CAUSE SUFFOCATION.

• INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO 

SMALL. 

ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN (69 CM) BY 51-5/8 

IN (131 CM), WITH A THICKNESS NOT EXCEEDING 6 IN (15CM) AND A MINIMUM THICKNESS 
OF 4 IN (10 CM)

. THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO 

SEAM OR EDGE TO EDGE WHERE APPROPRIATE.     

FALL HAZARD:

• WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST 

POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT COULD 
SERVE AS STEPS FOR CLIMBING OUT. AFTER RAISING SIDE, MAKE SURE LATCHES ARE 
SECURE 

(DISREGARD FOR NON-DROP SIDE CRIB)

.

• 

DO NOT

 LEAVE CHILD IN CRIB WITH SIDES LOWERED. BE SURE SIDE IS IN RAISED AND 

LOCKED POSITION WHENEVER CHILD IS IN CRIB 

(DISREGARD FOR NON-DROP SIDE CRIB)

• STOP USING CRIB WHEN CHILD BEGINS TO CLIMB OUT OR REACHES THE HEIGHT OF 35 IN    

(89 CM).

•WHEN STORING CRIB USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY 

CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.

• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY 

FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF 
HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.

• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS OF TIME.
• FOLLOW DUCTS IN CRIB.

Содержание Dream On ME Harbor 4-in-1






















Отзывы: