• connect Y-distribution cable (
F
) and LED connecting
cables (
E
)
• Cut both LED strips to the desired length
(analogous to step
3
)
• Perform function test (analog step
2
)
• Glue the LED strips evenly into the base profile using the
applied fixing tape - remove the protective film of the
applied fixing tape step by step
• The second LED strip can be connected in the same way
as in point 2 of the processing instructions.
• connect Y-distribution cable (
F
) with power supply plug
(
G
) and place it in the lower part of the base profile
• Renewed function test before cover profile is mounted
1
• Connection of a second LED strip
using the Y-
distribution cable
0
click
click
LED connection cables can also be shortened slightly
as needed to better stow the cables in the base profile.
4b
i
C
F
E
G
G
E
E
F
C
C
ATTENTION:
The power supply is designed for max. 7.2 m LED tape!
