Connection LED strips via corners
• It is essential to ensure that the LED tape is laid evenly
and loosely in the area of external and internal corners.
It must not be kinked and pulled (see bending radius
“General installation instructions”).
Use of connectors
Connector [LED tape to cable] (
C
)
• for connecting LED strips and
LED connection cables
Connector [LED tape to LED tape] (
D
)
• Can be used to continue LED tape sections
to create a seamless connection
Special case „Cubica LS Light up”:
• when installing outside corners of the
Cubica LS Light up
,
an additional cable set (Art.No. 5905798) to connect the
LED strip sections is needed. This must be purchased
additionally if required and it is not included in the
starter set.
5
6
Do you have any questions about the product?
Then please feel free to call us at: +49 3643/ 4170-711
or send us an e-mail: [email protected]
