6 Configuring the device manager
Use the Device Manager to configure the connection between the Dolby IMS3000 and several
different devices, such as projectors, 3D systems, a subtitle engine, closed-caption systems,
and raw devices.
•
•
•
•
•
•
•
•
•
•
6.1 Adding a projector
You can use the device manager to add a connection between the Dolby IMS3000 and a
projector.
About this task
You must have SuperUser privileges to add and delete devices.
Procedure
1. Click
Setup and Maintenance
.
2. Click
Device / Storage Configuration
.
3. Click
Device Manager
, click
New
, and then select
Projector
.
4. From the
Projector model
list, select the model of the projector.
5. Enter the head IP address.
6. Select
Yes
to enable projector subtitles, or select
No
to disable projector subtitles.
7. Select
Yes
if this projector is used as the primary projector, or select
No
if this projector is
not used as the primary projector.
If
No
is selected, then the projector is set as secondary. This is mainly used during a dual-
projector setup.
8. Click
Save
.
Configuring the device manager
Dolby IMS3000 User
ʼ
s Manual
10 December 2018 IMS.OM.005280.DRM Issue 4
30
