Figure 4: Logging out
4.4 Setting the time and adding NTP
You can set the time and date on your Dolby IMS3000. The system real-time clock (RTC) can be
adjusted up to six minutes annually to compensate for drift. If this six-minute allotment has
been consumed, please contact the Dolby Cinema Solutions and Support team.
4.4.1 Setting the time
Set the date and time from the
System Settings
window.
Procedure
1. Click
Setup & Maintenance
.
2. Click
System Settings
.
3. Click
Date and Time
.
4. In the
Date and Time
section, select a time format, and then click
Update
.
5. Select the hour, minute, and second intervals.
6. Select either
AM
or
PM
, and then click
Update
.
7. Select the time zone, and then click
Update
.
Setting up the Dolby IMS3000
Dolby IMS3000 User
ʼ
s Manual
10 December 2018 IMS.OM.005280.DRM Issue 4
22
