Figure 91: Speaker and array feeds list
3. Toggle the on/off button to enable playback of the test signal.
Figure 92: Test signal generator
When you enable the signal generator and select
Pink Noise
, you can configure the system
to automatically pan pink noise through each channel sequentially using the
Rotate
and
Snap
options:
•
Rotate
: Pans the signal through each channel sequentially, maintaining a continuous
panning volume. As the signal in one channel starts to fade, the signal in the next channel
begins, so the signals overlap in a smooth fashion.
•
Snap
: Pans the signal through each channel sequentially, one channel at a time, with only
one signal present at any time. After one signal ends, the next signal begins.
The default output level for pink noise, as well as for the thump and sine signal tones, is
-30 . The default output level for the sweep signal tone is -40 .
Configuring cinema audio on the Dolby IMS3000
Dolby IMS3000 User
ʼ
s Manual
10 December 2018 IMS.OM.005280.DRM Issue 4
95
