Dolby Laboratories IMS3000, Руководство пользователя

Страница: 34 / 134

Figure 16: Adding a JNior device
8. Reboot the Dolby IMS3000 to apply the changes.
6.5 Adding a raw device
You can use the device manager to add a raw device.
About this task
Raw devices can be set up to send messages to a generic device that does not appear in the
device list. You must have SuperUser privileges to add and delete devices.
Procedure
1. Click Setup and Maintenance .
2. Click Device / Storage Configuration .
3. Click Device Manager , click New , and then select Raw .
4. Enter the name of the raw device.
5. Enter the name of the vendor.
6. Enter the product name.
7. Enter the device IP address, and then select the protocol.
8. Enter the port number.
9. Click Save .
Configuring the device manager
Dolby IMS3000 User
ʼ
s Manual
10 December 2018 IMS.OM.005280.DRM Issue 4 34