DOL 46R Скачать руководство пользователя страница 1

 

 

dol-sensors a/s

           Hedelund 4, Glyngøre           7870 Roslev           Denmark           Tlf. +45 72 17 58 88           Fax +45 72 17 59 59           

www.dol-sensors.com

 

 
 
 

 

WARNING 

This manual describes important points of caution for safe use of this product in potentially explosive atmosphere. Please 
read this manual carefully before installing and operating the product. 

DOL 46R  

 

Capacitive Sensors 

EN  

TECHNICAL USER’S GUIDE 

ATEX zone 20, 21 and 22, dust 

CE

0539

  

 II 1D Ex ta IIIC T

200

 85 

o

C Da 

 

 

 

The DOL 46R capacitive relay sensor series is designed for general 
detection of feed, grain and solids. Certified according to ATEX directive 
2014/34/EU and IECEx for operation in potential explosive dust 
atmospheres. Classified as equipment for use in atmospheres with 
continuous presence of explosive dust with an ignition temperature above  
85 

o

C. 

Robust design with plastic housing with 7 joule shock/impact test. Available 
with trimmer interface with adjustable sensing distance, time delay and 
MaxRunTimer.

 

 

 
 
 
 
 
 
 
 

 

For 

other language variants

 of 

this document we refer t

www.dol-

sensors.com

 or your local dealer. 

 

Содержание 46R

Страница 1: ...C T200 85 o C Da The DOL 46R capacitive relay sensor series is designed for general detection of feed grain and solids Certified according to ATEX directive 2014 34 EU and IECEx for operation in potential explosive dust atmospheres Classified as equipment for use in atmospheres with continuous presence of explosive dust with an ignition temperature above 85 oC Robust design with plastic housing wi...

Страница 2: ... Use the black wires 1 and 4 NOTE The internal relay is in position NC when the supply voltage is connected and the sensor is activated wire 1 and 4 are connected Figure 2 No current sensor USER S GUIDE Easy trimmer adjustment on a single turn 240 trimmer with linear or non linear scale Functions which can be made available for adjustment on trimmers ON and or OFF delay MaxRunTimer Sensitivity DOL...

Страница 3: ... non explosive Adhere to the relevant national regulations and provisions The relevant installation regulations must be adhered to In particular take into account the requirements relating to the temperature limitation as regards the expected dust deposits Avoid electrostatic charging on housings and cables In case of cleaning the sensor this must be done with a damp cloth in order to prevent buil...

Страница 4: ... all remaining risk areas but mines 1 Category 1 The sensor can be used in zone 20 Flammable material present continuously or long periods 21 Flammable material present occasionally 22 Flammable material present in abnormal conditions for short periods D For use in hazardous areas in which explosive dust are present Ex Conforms to the Harmonized Standards ta Protection by enclosure highest level I...

Отзывы: