
Technical User Guide
DOL 94-10
5
5 Installation guide
5.1 Electrical connection
Installation, servicing and troubleshooting of all electrical equipment must be carried out by quali-
fied personnel in compliance with the applicable national and international standard EN 60204-1
and any other EU standards that are applicable in Europe.
The installation of a power supply isolator is required for each motor and power supply to facili-
tate voltage-free work on the electrical equipment. The power supply isolator is not included.
5.2 Cable routing
(A)
(B)
(A)
three-core cable for 24 VDC supply and 0-10 V signal to production controller.
(B)
4-core cable between scale and connection box.
5.2.1 M12x1 circular connection plug
Male
Female