User information Doka forming wagon T
11
999771002 - 08/2008 Ü
The Formwork Experts
Formwork configuration
The forming wagons are designed for a formwork
length of 5 m. Thanks to the flexible connection
possibilities provided by the hole grid in the sus-
pension beam, almost any formwork configuration
is possible. The formwork elements can also be pre-
assembled.
Example:
Example: Formwork adjustable with Adjusting
spindle T
A Location plate, adjustable in 5.3 cm increments
(included with Suspension beam)
B Suspension beam for Forming wagon T
C Multi-purpose waling or Steel waling WS10 Top50
D Doka beam H20
E Tie-rod 15.0 (length = 45 cm)
F Super-plate 15.0
G Flange-clamp H20
H Connecting pin 10cm + Spring cotter 6mm
I
Façade pre-cast member clamp V
Optimum accommodation of the stop-ends
on the side facing the bridge is obtained by
bracing the bottom steel waling (C) with
squared timbers and wedges, or with the
Façade pre-cast member clamp V (I) .
9730-240-01
A
B
C
C
D
E
F
G
H
I
A Adjusting spindle T
B Suspension beam for Forming wagon T
C Multi-purpose waling or Steel waling WS10 Top50
D Doka beam H20
E Tie-rod 15.0
F Super-plate 15.0
G Flange-clamp H20
H Connectin pin 10cm + Spring cotter 6mm
I
Façade pre-cast member clamp V
J e.g. Spindle strut T6 100/150cm
K Flange claw
9730-315-01
A
B
C
C
D
E
F
G
K
H
C
J
I
