DOGA SCOUT II, Инструкция по эксплуатации

Страница: 32 / 40

Instructions manual / Electric screwdrivers
32
If the time is limited on P27 and the fastening is not complete until the set time, Scout will verify the fastening NG at the set
time.
It can be cleared to the target by pressing RESET button.
Example #1 ) Cycle start pulse signal with time limit on P27
Example #2 ) Cycle start pulse signal
without time limit on P27
Without the fastening time limit on P27, it can be a useful application with a pallet conveyor system with stopper as shown
below. The stopper does not go down keeping the work piece in work area, if there is no Cycle complete OK signal from the
Scout.