Technical data
Transmitter
Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 m
Power supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x AAA 1,5 V battery
Battery life: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 12 months, based on usage
Frequency:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869,525 MHz (100 mW)
Tightness:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . waterproof
Weight:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 g (without the batteries)
Dimensions:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 x 53 x 29 mm (without the antenna)
Operating temperature:. . . . . . . . . . . . . . . . . . . -10 °C to +50 °C
Receiver (collar)
Power supply:. . . . . . . . . . . . . . . . . . . . . . . . . . . CR2 3 V lithium battery
Battery life:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 months, depending on usage
Frequency:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869,525 MHz
Tightness:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . waterproof
Weight:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 g (without the battery)
Dimensions:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 x 39 x 33 mm
Operating temperature:. . . . . . . . . . . . . . . . . . -10 °C to +50 °C
17
It is important to keep the device clean. Never use volatile substances eg.: thinner,
gasoline or other cleaners. To clean your Dogtrace d-control use a soft, damp cloth
and, if necessary, neutral detergent.
The transmitter and the receiver (collar) Dogtrace d-control professional is water-
proof only on condition of the good state of the seal. We recommend you to replace
the rubber seal, which is placed under the cover of the battery compartment of the
transmitter and the receiver, once a year.
Clean the rubber seal and make sure that the
rubber seal is correctly seated in its groove every time you change the batteries; tighten the
screws using adequate power.
If the device is not used for a longer time, take out the batteries from the battery
compartment.
Maintenance
