Dog Guard DG-9XT, Руководство пользователя

Страница: 5 / 44

5
t-4 transmItter
The T-4 Transmitter comes with an AC adaptor the plugs into the jack on the side of the
transmitter. When the transmitter is operating properly the green power LED is lit as well
as the rest loop indicator led. The yellow fault led will not be lit.
Green lIGHt – this light should be on , make sure the ON/OFF switch located on the
side is ON. Make sure the AC adaptor is plugged into the transmitter properly indicating
there is power to the system. If the Green light is NOT ON, check the outlet with a working
lamp or electronic device to see if the outlet is working. If it is working, you need to call
your local dealer.
reD lIGHt – this light should be on , indicating your loop is intact, (no breaks) and the
system is operating properly. If the red light is NOT ON, and you are hearing the audible
alarm, it most likely indicates that you have a wire break or even a power surge and you will
need to contact your local dealer to have it repaired.
YelloW lIGHt – this light should be off . A yellow light indicates that the system
is not functioning (possibly due to a power surge, lightning strike or a component in the
transmitter has failed). If the Yellow light is ON, it sometimes will be accompanied by an
audible alarm. Call your local dealer immediately to fix this issue.
GREEN LIGHT
This light should be ON.
YELLOW LIGHT
This light should be OFF.
RED LIGHT
This light should be ON.