OPERATING INSTRUCTIONS & PARTS MANUAL (OIPM)
Folding Gate (
2XZG5/2XZG6/2XZG7/2XZG8/2XZG9/2XZH1
)
Open Position
Left Gate Assembly (A)
Pin &
Hinge bar
Right Gate Assembly (B)
Pin &
Hinge Bar
Pin &
Washer
1. Stand folded gate (
A
) against the doorframe where you
intend to mount it. (See Figure 1)
2.
Mark center of hole on floor 1.5” away form wall to fit the 5/8”
pin at bottom of gate. (See Figure 2)
3.
Drill 3/4” hold in floor.
4.
Place washer (
E
) over 3/4”hole.
5.
Put gate pin (
A
) through washer into hole. (See Figure 2)
6. Install hinge bar (
C
)
on wall. Mark the mounting surface
through the holes in the hinge bar with a pen or pencil.(See
Figure 3) For mounting into:
Wood:
use 5/16”
×
2” Lag Bolts.
Steel:
drill and tap for 5/16”
×
1” Bolts.
Brick or concrete:
5/16”
×
2” Lag Bolts in 3/8” holes
with lead anchors.
7.
Drill appropriate size holes in the mounting surface.
8.
Mount the gate (
A
) by inserting the appropriate bolts through
the hinge bar.
9. Stretch the gate (
A
) across the
opening.
2XZG5/2XZG6/2XZG7/2XZG8/2XZG9/2XZH1
Manufactured for Grainger International, Inc. Lake Forest, IL 60045
Pin & Washer
(
E
)
Pin &
Caster Wheel
Washer
Figure 1
Pin,
Hinge bar
(
C/D
)
Figure 2
CASTER
Figure 3
Fixing bar (E)
Washer
Figure 4
